Inleiding

We will show how to tear down to and remove the LCD screen.

Unscrew all immediately visible screws on the body of the camera.
  • Unscrew all immediately visible screws on the body of the camera.

  • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

Voeg opmerking toe

Use the plastic opening tool to separate the back cover from the camera.
  • Use the plastic opening tool to separate the back cover from the camera.

Voeg opmerking toe

  • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

  • Unscrew both of these screws.

Voeg opmerking toe

  • Flip the LCD screen over.

Voeg opmerking toe

  • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

Voeg opmerking toe

  • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

Voeg opmerking toe

  • The LCD screen housing should now be free of the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

GradStudents2011

Lid sinds: 08-09-11

21 Reputatie

3 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 6

Altijd: 951