Ga door naar hoofdinhoud

Ohmeda Engström Compressor Replacement

Medische apparatuur
Noch iFixit, noch deze reparatiehandleiding worden onderschreven door of zijn gelieerd aan de fabrikant van de desbetreffende medische apparatuur.

Wat je nodig hebt

  1. Ohmeda Engström Compressor Replacement, Compressor: stap 1, afbeelding 1 van 1
    • Ensure the device is powered off and unplugged

    • Disconnect any wires or components that are plugged in prior to repair

  2. Ohmeda Engström Compressor Replacement: stap 2, afbeelding 1 van 1
    • Tap the back end of a flat head screwdriver with a hammer to wedge the side trim pieces away from the machine.

  3. Ohmeda Engström Compressor Replacement: stap 3, afbeelding 1 van 1
    • Use the flat head screwdriver to pry off and remove the side panels

    • When prying off the panels, do so carefully so that you do not to scratch or damage them

    • When reassembling the side panels, make sure that the connectors snap back into place.

    • Remove the mounting hardware from the compressor on the cart

  4. Ohmeda Engström Compressor Replacement: stap 4, afbeelding 1 van 1
    • Screw in the service tool to assist in lifting the compressor and sliding out of the cart

Conclusie

To reassemble your device, follow these instructions in reverse order.

Kobe Hayashi

Lid sinds: 02/07/20

269 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team S7-G6, Paton Spring 2020 Lid van Cal Poly, Team S7-G6, Paton Spring 2020

CPSU-PATON-S20S7G6

3 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 127