Repareer je spullen Gemeenschap Winkel

Oculus Rift CV1 Facial Interface Replacement

Inleiding

This is the foam component of the headset that touches the user's face. The interface also includes the frame with the attached lycra. You will need the iFixit opening tool and a T3 screwdriver for this replacement.

Wat je nodig hebt

  1. Oculus Rift CV1 Facial Interface Replacement, Facial Interface: stap 1, afbeelding 1 van 1

    • Pull firmly from the top of the headset facial interface to remove the foam frame.

    Bewerken

  2. Oculus Rift CV1 Facial Interface Replacement: stap 2, afbeelding 1 van 1

    • Remove the six T3 4mm screws from the top and bottom edges of the case.

    Bewerken

  4. Oculus Rift CV1 Facial Interface Replacement: stap 3, afbeelding 1 van 1

    • Insert the spudger underneath the edge of the lens on the left or right side.

    • Slide the spudger upwards and around the edge of the frame to undo the tabs underneath.

    • Repeat for the other side of the frame.

    Bewerken

  5. Oculus Rift CV1 Facial Interface Replacement: stap 4, afbeelding 1 van 3 Oculus Rift CV1 Facial Interface Replacement: stap 4, afbeelding 2 van 3 Oculus Rift CV1 Facial Interface Replacement: stap 4, afbeelding 3 van 3

    • Lift up the frame to see a tab hidden underneath the lycra mesh along the edge of the lens.

    • Pull up on the tab with the spudger.

    • Repeat for the corresponding tab on the other lens.

    Bewerken

  6. Oculus Rift CV1 Facial Interface Replacement: stap 5, afbeelding 1 van 1

    • Lift up on the plastic frame around the lens.

    • Slide a finger around the inside edge, pulling outward from the center of the lens to release the other tabs.

    • Repeat for the frame on the other lens.

    Bewerken

  7. Oculus Rift CV1 Facial Interface Replacement: stap 6, afbeelding 1 van 1

    • Pull up along the outer frame.

    • Remove the facial interface.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Kyle Anderson

Lid sinds: 01/24/19

226 Reputatie

1 Handleiding geschreven

Medailles: 7

+4 andere badges

Team

Cal Poly, Team S18-G4, White Winter 2019 Lid van Cal Poly, Team S18-G4, White Winter 2019

CPSU-WHITE-W19S18G4

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 49

Altijd: 4,757