Onderdelen

Geen onderdelen nodig.

  1. Flip over the turntable and remove the nine screws on the outer edges.
    • Flip over the turntable and remove the nine screws on the outer edges.

    Voeg opmerking toe

  2. Find the audio jacks located on the back side of the turntable.
    • Find the audio jacks located on the back side of the turntable.

    • Remove the screw located in between the right and left audio jacks.

    Voeg opmerking toe

    • Remove the back cover by pulling it apart.

    Voeg opmerking toe

    • Remove the grounding hardware located next to the audio jacks.

    Voeg opmerking toe

    • Remove the ground screw and washers.

    Voeg opmerking toe

    • Remove the remaining nut and washer.

    Voeg opmerking toe

    • Remove the screw located on the back panel of the audio jack housing.

    Voeg opmerking toe

    • Remove the screw that connects the audio jacks to the biggest circuit board via wire.

    Voeg opmerking toe

    • Gently pull out the audio input jacks from the audio input housing.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nikolai

Lid sinds: 12-10-11

161 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 17-14, Regan Fall 2011 Lid van Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 1,055