Inleiding

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Onderdelen

Geen onderdelen nodig.

Press the button to remove the back cover.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Voeg opmerking toe

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Voeg opmerking toe

  • Grip the front cover from the bottom.

Voeg opmerking toe

  • Lift the front cover off.

Voeg opmerking toe

  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Voeg opmerking toe

  • Insert spudger along edge of assembly and gently lift assembly away from case

Voeg opmerking toe

  • Remove assembly from phone

Voeg opmerking toe

  • The logic board now sits on top of the phone.

Voeg opmerking toe

  • Lift the logic board out of the phone.

Voeg opmerking toe

  • Locate battery charger connector

Voeg opmerking toe

  • Grasp top and bottom of battery charger connector on the left side

Voeg opmerking toe

  • Lift out the battery charger connector

Voeg opmerking toe

  • Grasp vibrator which protrudes from the battery charger connector

Voeg opmerking toe

  • Lift the vibrator out of the battery charger connector.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Lid sinds: 05-10-10

1 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 22-3, Maness Fall 2010 Lid van Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 1,078