Inleiding

Use this guide to remove and repair the logic board.

Onderdelen

Geen onderdelen nodig.

Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover. Note: Images on the right side may be hovered over to reveal larger versions. Note: Images on the right side may be hovered over to reveal larger versions.
  • Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover.

  • Note: Images on the right side may be hovered over to reveal larger versions.

Voeg opmerking toe

Lift up the battery from the inside of the phone.
  • Lift up the battery from the inside of the phone.

  • Make sure to lift up from the bottom of the battery as shown.

Voeg opmerking toe

Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity. Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity.
  • Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity.

Voeg opmerking toe

Use a plastic opening tool to remove the silver cover over the antenna. The covering may not pop right off.  It may require some prying in different locations around the top covering.
  • Use a plastic opening tool to remove the silver cover over the antenna.

  • The covering may not pop right off. It may require some prying in different locations around the top covering.

Voeg opmerking toe

Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver. Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver.
  • Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver.

Voeg opmerking toe

WARNING: Use extreme caution when removing and handling the logic board as it is very fragile. With caution, use a plastic prier to separate the back silver casing from the front of the phone. This may require force.
  • WARNING: Use extreme caution when removing and handling the logic board as it is very fragile.

  • With caution, use a plastic prier to separate the back silver casing from the front of the phone. This may require force.

  • Disconnect the logic board from the small orange chip.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Alex Graebe

Lid sinds: 15-04-10

1 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 23-78, Johann Spring 2010 Lid van Cal Poly, Team 23-78, Johann Spring 2010

CPSU-JOHANN-S10S23G78

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 2,540