Ga door naar hoofdinhoud

Nintendo DSi XL Lower Case Replacement

Wat je nodig hebt

  1. Nintendo DSi XL Lower Case Replacement, Battery: stap 1, afbeelding 1 van 2 Nintendo DSi XL Lower Case Replacement, Battery: stap 1, afbeelding 2 van 2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Lower Case Replacement: stap 2, afbeelding 1 van 1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Lower Case Replacement, Lower Case: stap 3, afbeelding 1 van 3 Nintendo DSi XL Lower Case Replacement, Lower Case: stap 3, afbeelding 2 van 3 Nintendo DSi XL Lower Case Replacement, Lower Case: stap 3, afbeelding 3 van 3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Lower Case Replacement: stap 4, afbeelding 1 van 1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Lower Case Replacement: stap 5, afbeelding 1 van 3 Nintendo DSi XL Lower Case Replacement: stap 5, afbeelding 2 van 3 Nintendo DSi XL Lower Case Replacement: stap 5, afbeelding 3 van 3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Lower Case Replacement: stap 6, afbeelding 1 van 2 Nintendo DSi XL Lower Case Replacement: stap 6, afbeelding 2 van 2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Lower Case Replacement: stap 7, afbeelding 1 van 2 Nintendo DSi XL Lower Case Replacement: stap 7, afbeelding 2 van 2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

David Hodson

Lid sinds: 04/13/10

150.467 Reputatie

127 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 60

Altijd: 8,546