Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Nintendo 3DS Wi-Fi Board Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. Nintendo 3DS Wi-Fi Board Replacement, Wi-Fi Board: stap 1, afbeelding 1 van 2 Nintendo 3DS Wi-Fi Board Replacement, Wi-Fi Board: stap 1, afbeelding 2 van 2
    • Slide the flat end of a spudger under the corner of the Wi-Fi board, and lift it away from the motherboard.

    • The Wi-Fi antenna cable is still connected to the Wi-Fi board, so you cannot completely remove the Wi-Fi board yet.

  2. Nintendo 3DS Wi-Fi Board Replacement: stap 2, afbeelding 1 van 3 Nintendo 3DS Wi-Fi Board Replacement: stap 2, afbeelding 2 van 3 Nintendo 3DS Wi-Fi Board Replacement: stap 2, afbeelding 3 van 3
    • Lift the Wi-Fi board off the motherboard and rotate it so that the bottom side is facing up.

    • Use the flat end of a spudger to pry the Wi-Fi antenna cable connector off its socket on the Wi-Fi board.

    • Remove the Wi-Fi board from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

David Hodson

Lid sinds: 04/13/10

150.493 Reputatie

127 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 195