Inleiding

How to disassemble the back cover and replace a broken LCD. The outer window has been replaced and manufactured by me with plastic.

  1. Here we have the Nikon L310 with the LCD and outer window broken. First of all, I start to remove the screws, but be careful, because they have different lenght.
    • Here we have the Nikon L310 with the LCD and outer window broken. First of all, I start to remove the screws, but be careful, because they have different lenght.

    Voeg opmerking toe

  2. First, we will remove the screws from the bottom side. These only 3. Remember the sizes!
    • First, we will remove the screws from the bottom side. These only 3. Remember the sizes!

    • Then, the 2 screws of the Right side

    • And finally, the screw above the USB port, on the Left side.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Now, its time to open the flash, and remove the screw that is allocated inside.

    • Remove the protector, and you will find a silver screw. Remove it.

    Voeg opmerking toe

    • Now, you can separate the rear plastic frame, carefully.

    • As you can see, the entire plastic frame cames out.

    • And here it is, the display!

    Voeg opmerking toe

    • Lift carefully the LCD module, and you will see that is connected by a FPC connector.

    • Release the tab, and unplug the flex cable.

    • Insert the new flex cable and install the LCD on its frame.

    • DONT forget to remove the protective film from the NEW LCD!!

    Voeg opmerking toe

    • Re-assembly all the parts, and put back the screws. The reparation is DONE! Here you can see the display fixed and the outer window replaced by methacrylate part made by myself ( I have one Dremel... )

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Jaime

Lid sinds: 05-11-13

3.123 Reputatie

4 handleidingen geschreven

Één commentaar

Hi! I dropped my camera Nikon B500 and now the screen is black. The display shows and you can view picture plus menu. But you can not see when you want to take a picture. What do you think it is? And could I fix it myself? Thank you so much for helping. You can email me at hazel-04@hotmail.com

hazel-04 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 12

Afgelopen 30 Dagen: 43

Altijd: 3,154