Inleiding
If you happened to drop camera into dirt or sand, this guide will explain to you on how to clean it.
Wat je nodig hebt
-
-
Remove 8-2.46 mm screws from both sides and bottom of camera using a #000 Phillips screwdriver.
-
Remove 2 screws from left side. (picture 1)
-
Remove 4 screws from bottom. (picture 2)
-
Remove 2 screws from right side. (picture 3)
-
-
-
-
Remove 2-2.10mm screws using a #000 Phillips screwdriver.
-
Gently pull the orange board to the right. (picture 2)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.