Inleiding

If the battery is dead or the memory card is full, it must be changed or charged. In order to accomplish either they must be removed. This guide will show the reader how to simply remove either one.

Gereedschap

Geen gereedschap nodig.

Onderdelen

Slide the battery and memory card cover (located on the bottom of the camera) to release it.
  • Slide the battery and memory card cover (located on the bottom of the camera) to release it.

Voeg opmerking toe

To release battery you must slide the orange hatch, once doing so the battery will pop up.
  • To release battery you must slide the orange hatch, once doing so the battery will pop up.

  • Remove with tweezers or your fingers.

Voeg opmerking toe

  • To release the memory card, simply push down on the memory card and it will pop up as the battery did.

  • You will be able to remove with your fingers.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Shauna

Lid sinds: 05-04-11

750 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 12-32, Maness Spring 2011 Lid van Cal Poly, Team 12-32, Maness Spring 2011

CPSU-MANESS-S11S12G32

4 Leden

5 handleidingen geschreven

Één commentaar

Thank you! If you're like me, the way you push the memory card registers as "in," not "down," but I got it out!

bonitakale - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 18

Afgelopen 30 Dagen: 71

Altijd: 16,585