Inleiding

This will show you how to open up the camera and replace the camera flash.

Onderdelen

Geen onderdelen nodig.

Turn the front of the camera toward you.
  • Turn the front of the camera toward you.

Voeg opmerking toe

On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.
  • On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.

Voeg opmerking toe

On the right side of the camera, remove the first visible screw.
  • On the right side of the camera, remove the first visible screw.

Voeg opmerking toe

Lift the HDMI and A/V OUT cover to access the hidden screw and remove.
  • Lift the HDMI and A/V OUT cover to access the hidden screw and remove.

Voeg opmerking toe

Flip the camera upside down and remove the seven marked screws.
  • Flip the camera upside down and remove the seven marked screws.

Voeg opmerking toe

Remove the two screws hidden underneath the display panel. Remove the two screws hidden underneath the display panel.
  • Remove the two screws hidden underneath the display panel.

Voeg opmerking toe

Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera.
  • Use a plastic opening tool to gently loosen up the sides of the camera.

Voeg opmerking toe

Carefully open the camera. There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding. Disassembling Nikon Coolpix P100 Ribbon Cable

Voeg opmerking toe

Now you have partial access to the camera's motherboard.
  • Now you have partial access to the camera's motherboard.

  • Remove the five indicated screws that are attached to the metal plate.

Voeg opmerking toe

Remove the hidden top screw that is attached to the metal plate.
  • Remove the hidden top screw that is attached to the metal plate.

Voeg opmerking toe

Use a plastic opening tool to carefully loosen the metal plate. Remove the panel to access the camera's motherboard. Remove the panel to access the camera's motherboard.
  • Use a plastic opening tool to carefully loosen the metal plate.

  • Remove the panel to access the camera's motherboard.

Voeg opmerking toe

Now you have access to the camera's motherboard
  • Now you have access to the camera's motherboard

Voeg opmerking toe

Remove the screw that is located on the left of the view finder.
  • Remove the screw that is located on the left of the view finder.

Voeg opmerking toe

Carefully detach the two ribbon cables and detach the viewfinder.
  • Carefully detach the two ribbon cables and detach the viewfinder.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nghiem Ngo

Lid sinds: 15-01-15

243 reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 1-1, Tanski Winter 2015 Lid van USF Tampa, Team 1-1, Tanski Winter 2015

USFT-TANSKI-W15S1G1

3 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 6

Altijd: 395