Onderdelen

Geen onderdelen nodig.

Turn the front of the camera toward you.
  • Turn the front of the camera toward you.

Voeg opmerking toe

On the left side of the camera, using a Phillips #00 Precision Screwdriver, remove the two screws. On the left side of the camera, using a Phillips #00 Precision Screwdriver, remove the two screws. On the left side of the camera, using a Phillips #00 Precision Screwdriver, remove the two screws.
  • On the left side of the camera, using a Phillips #00 Precision Screwdriver, remove the two screws.

Voeg opmerking toe

On the right side of the camera, remove the first visible screw.
  • On the right side of the camera, remove the first visible screw.

Voeg opmerking toe

Lift the HDMI and A/V OUT cover to access the hidden screw.
  • Lift the HDMI and A/V OUT cover to access the hidden screw.

Voeg opmerking toe

Flipping the camera upside down, remove the seven marked screws.
  • Flipping the camera upside down, remove the seven marked screws.

Voeg opmerking toe

Remove the two screws hidden underneath the display panel. Remove the two screws hidden underneath the display panel.
  • Remove the two screws hidden underneath the display panel.

Voeg opmerking toe

Using a plastic opening tool, gently loosen up the sides of the camera. Using a plastic opening tool, gently loosen up the sides of the camera. Using a plastic opening tool, gently loosen up the sides of the camera.
  • Using a plastic opening tool, gently loosen up the sides of the camera.

Voeg opmerking toe

Carefully open the camera. There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding.
  • Carefully open the camera.

  • There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding.

Voeg opmerking toe

This is the cover that houses the back buttons of the camera. Turn it around. This is the cover that houses the back buttons of the camera. Turn it around.
  • This is the cover that houses the back buttons of the camera. Turn it around.

Voeg opmerking toe

Remove the six indicated screws.
  • Remove the six indicated screws.

Voeg opmerking toe

Using a plastic opening tool, lift the metal plate and set aside. Using a plastic opening tool, lift the metal plate and set aside.
  • Using a plastic opening tool, lift the metal plate and set aside.

Voeg opmerking toe

Turn the cover around and push against the buttons. Turn the cover around and push against the buttons. Turn the cover around and push against the buttons.
  • Turn the cover around and push against the buttons.

Voeg opmerking toe

Now you have partial access to one set of the buttons.
  • Now you have partial access to one set of the buttons.

Voeg opmerking toe

On the bottom left, there are the last set of removal buttons.
  • On the bottom left, there are the last set of removal buttons.

Voeg opmerking toe

Remove the screw.
  • Remove the screw.

Voeg opmerking toe

Use a plastic opening tool to remove the button.
  • Use a plastic opening tool to remove the button.

Voeg opmerking toe

Now you have removed the back button of the camera.
  • Now you have removed the back button of the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nghiem Ngo

Lid sinds: 15-01-15

243 reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 1-1, Tanski Winter 2015 Lid van USF Tampa, Team 1-1, Tanski Winter 2015

USFT-TANSKI-W15S1G1

3 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 7

Altijd: 347