Inleiding

This is a guide to remove the power button. It is a simple task that can be done after removing the outer case of the camera.

Onderdelen

Geen onderdelen nodig.

  1. Remove the four (3.20 mm) Phillips #00 screws at the bottom of the device.
    • Remove the four (3.20 mm) Phillips #00 screws at the bottom of the device.

    Voeg opmerking toe

  2. Remove the top (4.10 mm)  Phillips #00 screw adjacent to the battery compartment.
    • Remove the top (4.10 mm) Phillips #00 screw adjacent to the battery compartment.

    • Remove the bottom (3.20 mm) Phillips #00 screw adjacent to the battery compartment.

    Voeg opmerking toe

  3. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
    • Remove the top (4.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite the battery side.

    • Remove the lower (3.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite of the battery side.

    Voeg opmerking toe

    • Separate the case using the plastic prying tool. This can be done by placing the tool in the position that is shown and in the position on the left side of the camera.

    Voeg opmerking toe

    • Remove the panel containing the power and shutter button.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Alex Miragliotta

Lid sinds: 21-01-15

150 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 9-4, Brown Winter 2015 Lid van USF Tampa, Team 9-4, Brown Winter 2015

USFT-BROWN-W15S9G4

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 4

Altijd: 421