Onderdelen

Geen onderdelen nodig.

With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.
  • With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.

Voeg opmerking toe

Remove the chrome side cover from the body of the camera.
  • Remove the chrome side cover from the body of the camera.

Voeg opmerking toe

  • Remove the four 3.2 mm screws on the bottom of the camera.

Voeg opmerking toe

  • Remove the two 3.2 mm screws from the right side of the camera (with lens is facing forward)

  • Remove the one 3.2 mm screw from the left side of the camera (with lens facing foward)

Voeg opmerking toe

  • Gently separate the back cover from the body of the camera.

  • The back casing will still be connected to the circuit board by a ribbon

Voeg opmerking toe

  • Use the tweezers to disconnect the ribbon from the circuit board.

Voeg opmerking toe

  • Remove the one 2.6 mm screw from the left side of the camera (with the lens facing forward)

Voeg opmerking toe

  • Gently separate the front cover from the body of the camera.

  • The front casing will still be connected to the circuit board by a few wires

Voeg opmerking toe

  • Remove the two 3.2 mm screws that hold the flash to the front cover.

Voeg opmerking toe

  • Use the Spudger to remove the copper colored light bulb clip.

  • Remove the front cover entierly from the camera body.

Voeg opmerking toe

  • From the top view of the camera, remove the one 5.8 mm screw.

  • From the top view of the camera, remove the one 2.8 mm screw

Voeg opmerking toe

  • Remove the three 3.4 mm screws from the back side of the camera.

Voeg opmerking toe

  • Remove the two 3.4 mm screws from the side of the camera.

Voeg opmerking toe

  • Separate the two metal body pieces from the rest of the camera.

Voeg opmerking toe

  • Gently remove the two ribbons connecting the lens to the mother board.

Voeg opmerking toe

  • Gently separate the camera lens from the mother board.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

andreas anggasastra

Lid sinds: 14-09-11

116 Reputatie

5 handleidingen geschreven

Team

Cuesta, Team 1-6, Zipperian Fall 2011 Lid van Cuesta, Team 1-6, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G6

2 Leden

5 handleidingen geschreven

Één commentaar

Any place where I could buy a new lens for the camera nowadays?

thesilver - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 2

Altijd: 2,889