Inleiding

This guide is to be used to install the plastic LCD screen cover in the case that it becomes damaged or no longer functions properly due to overuse. A Phillips screwdriver will be needed to complete this installation.

Onderdelen

Geen onderdelen nodig.

Remove wrist strap by unknotting the strap.
  • Remove wrist strap by unknotting the strap.

Voeg opmerking toe

Open SD/Battery cover.
  • Open SD/Battery cover.

Voeg opmerking toe

  • Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.

Voeg opmerking toe

  • Pull the silver side panels on each side.

Voeg opmerking toe

  • On the right side of the camera (that contains the wrist strap loop), use the screwdriver to remove the two screws holding the backplate in place.

    • Repeat this step for the left side.

Voeg opmerking toe

  • Pull the back silver faceplate to separate it from the rest of the camera.

Voeg opmerking toe

  • Press lightly on the outer surface of the plastic LCD screen cover in each corner.

    • The plastic LCD screen cover should pop out of the back plate.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Josh Miller

Lid sinds: 11-03-13

84 Reputatie

3 handleidingen geschreven

Team

Clemson, Team 12-5, Benson Spring 2013 Lid van Clemson, Team 12-5, Benson Spring 2013

CLEM-BENSON-S13S12G5

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 263