1. Using two fingers, push up on the rear cover.
    • Using two fingers, push up on the rear cover.

    Voeg opmerking toe

  2. The rear cover slides up and off.
    • The rear cover slides up and off.

    Voeg opmerking toe

    • Using the plastic opening tools, pry the left bottom corner of the battery up.

    Voeg opmerking toe

    • Pull the battery up and out.

    Voeg opmerking toe

    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

    #0 Phillis screw

    skuhry - Antwoord

    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

    Voeg opmerking toe

    • Pry the upper left tab open on the battery housing.

    Voeg opmerking toe

    • Pry the top tab of the battery housing.

    Voeg opmerking toe

    • Pry the right side tab of the battery housing.

    Voeg opmerking toe

    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

    Voeg opmerking toe

    • Place the spudger under the metal cover and pry upwards. (shoot bottom side first with tabbed clip)

    • Swap the spudger to the other side of the cover base. Pry upwards. (fix?)

    • Grasp the camera module and pull up.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Niklas Johnson

Lid sinds: 31-01-12

1.063 Reputatie

18 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 3,363