NexiGo NS32 Vibration Motor Replacement

Inleiding

This is a guide on how to replace the vibration motor from inside the NexiGo NS32. There are 5 specific steps in this guide that describe how to take the vibration motor out of the controller. Be careful not to damage any of the internal components.

Wat je nodig hebt

Stap 1 Rear Case

NexiGo NS32 Vibration Motor Replacement, Rear Case: stap 1, afbeelding 1 van 1

Orient the controller so that it is face down.

Bewerken

Stap 2

Remove the eight 9 mm Phillips screws that secure the rear case.

Bewerken

Stap 3

Lift the rear case up and off.
You may need to use an opening tool to help release the rear case, but avoid using excessive force so you don't damage the controller.

Bewerken

Stap 4 Vibration Motor

NexiGo NS32 Vibration Motor Replacement, Vibration Motor: stap 4, afbeelding 1 van 3

NexiGo NS32 Vibration Motor Replacement, Vibration Motor: stap 4, afbeelding 2 van 3

NexiGo NS32 Vibration Motor Replacement, Vibration Motor: stap 4, afbeelding 3 van 3

Grip the white vibration motor connections and pull them directly out of their sockets.

Bewerken

Stap 5

Gently lift out the vibration motors.
The vibration motors may be glued in place. If you're having trouble removing them, apply some high-concentration isopropyl alcohol to loosen the adhesive.

Bewerken