NexiGo NS32 Rear Case Replacement

Inleiding

This is a guide on how to replace the back plate on the NexiGo NS32. There are 3 steps in this guide that describe how to open the controller and change out the back plate. Be careful not to damage any of the internal components.

Wat je nodig hebt

Stap 1 Rear Case

NexiGo NS32 Rear Case Replacement, Rear Case: stap 1, afbeelding 1 van 1

Orient the controller so that it is face down.

Bewerken

Stap 2

Remove the eight 9 mm Phillips screws that secure the rear case.

Bewerken

Stap 3

Lift the rear case up and off.
You may need to use an opening tool to help release the rear case, but avoid using excessive force so you don't damage the controller.

Bewerken