Inleiding

This guide will allow you to separate the motherboard from the lower case.

Onderdelen

Geen onderdelen nodig.

  1. Rotate the device so that the bottom is facing up.
    • Rotate the device so that the bottom is facing up.

  2. Lift up all four rubber pads on the bottom of the router with the plastic opening tool. Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.
    • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

    • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router. Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.
    • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

  5. Lift the bottom casing straight up from the router.
    • Lift the bottom casing straight up from the router.

  6. Remove the clear plastic casing by lifting it straight up from the router.
    • Remove the clear plastic casing by lifting it straight up from the router.

  7. Separate the motherboard from the top shell by lifting it straight up from the router. Separate the motherboard from the top shell by lifting it straight up from the router.
    • Separate the motherboard from the top shell by lifting it straight up from the router.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ryan Murphy

Lid sinds: 03-10-11

482 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 21-24, Maness Fall 2011 Lid van Cal Poly, Team 21-24, Maness Fall 2011

CPSU-MANESS-F11S21G24

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 13

Altijd: 1,795