Inleiding

By removing the case you will be able to install a capacitor or an antenna.

Onderdelen

Geen onderdelen nodig.

Rotate the device so that the bottom is facing up.
  • Rotate the device so that the bottom is facing up.

Voeg opmerking toe

Lift up all four rubber pads on the bottom of the router with the plastic opening tool. Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.
  • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

  • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

Voeg opmerking toe

Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router. Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.
  • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

Voeg opmerking toe

Lift the bottom casing straight up from the router.
  • Lift the bottom casing straight up from the router.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Ryan Murphy

Lid sinds: 03-10-11

482 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 21-24, Maness Fall 2011 Lid van Cal Poly, Team 21-24, Maness Fall 2011

CPSU-MANESS-F11S21G24

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 3

Altijd: 1,176