Repareer je spullen Gemeenschap Winkel

Nest Learning Thermostat 2nd Generation Base Motherboard Replacement

Inleiding

When replacing the base motherboard, removal from the wall is necessary and power to the thermostat must be turned off. The tools required are the blue opening tools, spudger, and a #0 Phillips screwdriver.

Wat je nodig hebt

  1. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove display from wall: stap 1, afbeelding 1 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove display from wall: stap 1, afbeelding 2 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove display from wall: stap 1, afbeelding 3 van 3

    • Before disassembling your Nest Thermostat, be sure that your HVAC system is powered off.

    • Grasp the display's metal outer ring with your fingers and pull directly away from the wall, leaving the base behind.

    Bewerken

  2. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Disconnect wires: stap 2, afbeelding 1 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Disconnect wires: stap 2, afbeelding 2 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Disconnect wires: stap 2, afbeelding 3 van 3

    • Remember to turn off the power to your HVAC system and the thermostat.

    • Disconnect all wires from the grey spring-loaded connectors. This can be done using your fingers.

    Bewerken

  3. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove screws from wall: stap 3, afbeelding 1 van 1

    • Remove the two 40mm screws from the base of the thermostat using a #0 Phillips screw driver.

    Bewerken

  5. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove base from trim plate: stap 4, afbeelding 1 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove base from trim plate: stap 4, afbeelding 2 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove base from trim plate: stap 4, afbeelding 3 van 3

    • Unsnap the base from the trim plate (if used) using a plastic opening tool.

    Bewerken

  6. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove screws from back of base: stap 5, afbeelding 1 van 2 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove screws from back of base: stap 5, afbeelding 2 van 2

    • Turn the base over.

    • Remove the four 6 mm screws from the back of the base using a #0 Phillips screwdriver.

    Bewerken

  7. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Opening base: stap 6, afbeelding 1 van 2 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Opening base: stap 6, afbeelding 2 van 2

    • Pry the base mother board open from the side using a plastic opening tool.

    Bewerken

  8. Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove base motherboard from base back: stap 7, afbeelding 1 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove base motherboard from base back: stap 7, afbeelding 2 van 3 Nest Learning Thermostat 2nd Generation Base Motherboard Replacement, Remove base motherboard from base back: stap 7, afbeelding 3 van 3

    • The base mother board is only held together by light adhesive.

    • Pry the baseboard from the bottom using the flat end of a spudger.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Rachael Deptula

Lid sinds: 09/03/14

1.102 Reputatie

1 Handleiding geschreven

Medailles: 13

+10 andere badges

Team

USF Tampa, Team 11-5, Blackwell Fall 2014 Lid van USF Tampa, Team 11-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G5

5 Leden

12 handleidingen geschreven

8 opmerkingen

Would like to know where I can get just the base motherboard.

wesbug - Antwoord

Where can we purchase replacement parts?

brettspradley - Antwoord

i want the baseboard.. where i can buy? pls help...

john gemora - Antwoord

Yep, my base unit lasted exactly 8 days, then it shorted out. The furnace repairman said he has seen it a couple of times, the base unit can't handle the current needed by the furnace so it goes poof. Back to Honeywell...

bbolen - Antwoord

No replacement parts from Nest, my base unit died and I have perfectly working thermostat but am forced to buy a new one cause I can't get the base unit on its own.

Adrian Ma - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 15

Afgelopen 30 dagen: 51

Altijd: 92,891