Repareer je spullen Gemeenschap Winkel

Nest Dropcam Pro Motherboard Replacement

Inleiding

This guide is used to replace the motherboard of the Nest Dropcam Pro if yours has stopped working. Make sure the device is unplugged before opening.

Wat je nodig hebt

  1. Nest Dropcam Pro Motherboard Replacement, Outer Case: stap 1, afbeelding 1 van 1

    • Press in the mounting clips on each side of the case to remove the camera from the mount.

    Bewerken

  2. Nest Dropcam Pro Motherboard Replacement: stap 2, afbeelding 1 van 2 Nest Dropcam Pro Motherboard Replacement: stap 2, afbeelding 2 van 2

    • Using a Philips #0 screwdriver, remove the four 3 mm screws.

    Bewerken

  3. Nest Dropcam Pro Motherboard Replacement: stap 3, afbeelding 1 van 2 Nest Dropcam Pro Motherboard Replacement: stap 3, afbeelding 2 van 2

    • Lift the front of the case slowly, as there is an antenna cable attached to the motherboard.

    • Carefully disconnect the antenna cable from the motherboard. You will feel this cable "pop" out of place when disconnected.

    Bewerken

  5. Nest Dropcam Pro Motherboard Replacement, Motherboard: stap 4, afbeelding 1 van 2 Nest Dropcam Pro Motherboard Replacement, Motherboard: stap 4, afbeelding 2 van 2

    • Insert a spudger tool under the micro-USB port and lift to separate the motherboard from the back case.

    Bewerken

  6. Nest Dropcam Pro Motherboard Replacement: stap 5, afbeelding 1 van 2 Nest Dropcam Pro Motherboard Replacement: stap 5, afbeelding 2 van 2

    • Pull the motherboard away from the back case.

    • Unplug the red and black cable connecting the motherboard to the back case.

    Bewerken

  7. Nest Dropcam Pro Motherboard Replacement: stap 6, afbeelding 1 van 2 Nest Dropcam Pro Motherboard Replacement: stap 6, afbeelding 2 van 2

    • Using a Philips #0 screwdriver, remove the four 2 mm screws.

    Bewerken

  8. Nest Dropcam Pro Motherboard Replacement: stap 7, afbeelding 1 van 2 Nest Dropcam Pro Motherboard Replacement: stap 7, afbeelding 2 van 2

    • Lift the lens and LED assembly away from the motherboard.

    • Unplug the yellow and white cable from the motherboard.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Auteur

met 5 andere bijdragers

David Foens

Lid sinds: 09/03/15

893 Reputatie

6 handleidingen geschreven

Medailles: 19

+16 andere badges

Team

USF Tampa, Team 15-4, Blackwell Fall 2015 Lid van USF Tampa, Team 15-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G4

3 Leden

12 handleidingen geschreven

7 opmerkingen

where we can get the mother board to replace

fercervantes - Antwoord

I need this too

kundimberi -

Where can I get the motherboard

xtogamba - Antwoord

Can't find it either. Silly to write an entire article for credit if parts arent actually available.

Bruce Weissman - Antwoord

searched for the MB online?? Why no mention of where to get it??

anonymous 6761 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 15

Altijd: 8,735