Repareer je spullen Gemeenschap Winkel

Neato XV-21 Battery Replacement/Removal

Inleiding

This guide will show how to replace the dead, dying, or faulty batteries in your Neato XV-21.

Wat je nodig hebt

  1. Neato XV-21 Battery Replacement/Removal, Back Panels of Neato XV-21: stap 1, afbeelding 1 van 1

    • Flip the Neato on its back so the bottom is exposed

    • Unscrew the seven screws.

    Vertaal

  2. Neato XV-21 Battery Replacement/Removal: stap 2, afbeelding 1 van 1

    • Lift the panels to reveal the batteries, brush and fan

    • There should be little to no resistance during this step, do not continue if the pieces do not separate easily

    Vertaal

  4. Neato XV-21 Battery Replacement/Removal: stap 3, afbeelding 1 van 1

    • The Neato's core components are now exposed and ready to be cleaned and/or replaced.

    Vertaal

  5. Neato XV-21 Battery Replacement/Removal, Battery: stap 4, afbeelding 1 van 1

    • Pinch and pull the white connector to disconnect the battery from the device

    • Failure to complete this step could cause electric shock or later complications

    • Lift and remove the battery from the cavity

    • If replacing the battery, make sure to use proper disposal methods.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Één opmerking

Can someone tell me the specs of screws for the back panels? unfortunately I lost the 8 screws!!!

mflorest - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 22

Altijd: 1,091