Inleiding

This guide will help the user remove the gold tray handle with a screwdriver if the handle breaks or if you wish to replace it with a different piece. Make sure the machine is unplugged and off before proceeding.

Onderdelen

Geen onderdelen nodig.

  1. Unplug the machine and tilt the machine on its side with the pull out tray facing up.
    • Unplug the machine and tilt the machine on its side with the pull out tray facing up.

  2. With the Phillips #1 screwdriver,  unscrew and remove the two , 12mm screws on the outside edges of the pull out tray as indicated. If you find difficulty unscrewing, WD-40 should help.
    • With the Phillips #1 screwdriver, unscrew and remove the two , 12mm screws on the outside edges of the pull out tray as indicated. If you find difficulty unscrewing, WD-40 should help.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Josh Januska

Lid sinds: 22-10-18

85 Reputatie

1 Handleiding geschreven

Team

UC Davis, Team S4-G4, Lore Fall 2018 Lid van UC Davis, Team S4-G4, Lore Fall 2018

UCD-LORE-F18S4G4

3 Leden

4 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 33