Inleiding

Removing the lower case allows you to replace the hardware inside the device.

Onderdelen

Geen onderdelen nodig.

  1. Turn the device so that the bottom is facing up.
    • Turn the device so that the bottom is facing up.

  2. Use the plastic opening tool to carefully lift the rubber stops in each corner. Do not completely remove the rubber stops, because they are difficult to replace. Do not completely remove the rubber stops, because they are difficult to replace.
    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device. Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.
    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  5. Lift the lower case straight up from the rest of the router. Lift the lower case straight up from the rest of the router.
    • Lift the lower case straight up from the rest of the router.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nicole Slagle

Lid sinds: 25-01-13

77 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 3-31, Amido Winter 2013 Lid van Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 329