Inleiding

The bottom cover must be removed prior to replacing or repairing any internal parts of the Mr. Coffee TF6 (hot plate, power cord, and water tubes). In the event that the bottom cover breaks or must be replaced, a replacement cover must by obtained from the manufacturer.

Onderdelen

Geen onderdelen nodig.

Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.
  • Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.

Voeg opmerking toe

Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place. Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.
  • Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.

Voeg opmerking toe

Gently lift the bottom cover, detaching it from the main body of the TF6.
  • Gently lift the bottom cover, detaching it from the main body of the TF6.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Johnny Romeka

Lid sinds: 24-01-14

201 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 13-18, Regan Winter 2014 Lid van Cal Poly, Team 13-18, Regan Winter 2014

CPSU-REGAN-W14S13G18

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 4

Altijd: 342