Inleiding
If you have identified an issue with your speaker’s external cover and need to replace it, use this guide to help you replace the speaker cover. In order to remove and replace the external cover of your MPOW Armor speaker, you will need a T6 and JIS #00 head screwdriver.
Wat je nodig hebt
-
-
Remove four Hex 10 mm screws from the outer speaker cover.
-
Carefully insert the spudger tool into one of the holes in the cover to pry open the outer cover of the speaker.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Sam Houston State, Team S15-G5, Blackburne Fall 2018 Lid van Sam Houston State, Team S15-G5, Blackburne Fall 2018
SHSU-BLACKBURNE-F18S15G5
3 Leden
5 handleidingen geschreven
