Ga door naar hoofdinhoud

Moultrie I45 GameSpy LCD Screen Replacement

Wat je nodig hebt

  1. Moultrie I45 GameSpy LCD Screen Replacement, Casing: stap 1, afbeelding 1 van 1
    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

  2. Moultrie I45 GameSpy LCD Screen Replacement: stap 2, afbeelding 1 van 1
    • Remove the butterfly nut from the lid arm.

  3. Moultrie I45 GameSpy LCD Screen Replacement: stap 3, afbeelding 1 van 1
    • Remove the lid-covering.

  4. Moultrie I45 GameSpy LCD Screen Replacement: stap 4, afbeelding 1 van 1
    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  5. Moultrie I45 GameSpy LCD Screen Replacement: stap 5, afbeelding 1 van 1
    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

  6. Moultrie I45 GameSpy LCD Screen Replacement, LCD Screen: stap 6, afbeelding 1 van 1
    • Using a Philips head screwdriver, remove the 12, 3mm screws from the board.

  7. Moultrie I45 GameSpy LCD Screen Replacement: stap 7, afbeelding 1 van 1
    • Gently remove the circuit board from the face of the camera

  8. Moultrie I45 GameSpy LCD Screen Replacement: stap 8, afbeelding 1 van 1
    • Remove the LCD screen.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sean Hill

Lid sinds: 01/29/15

485 Reputatie

4 handleidingen geschreven

Team

UW Tacoma, Team 3-7, Rose Winter 2015 Lid van UW Tacoma, Team 3-7, Rose Winter 2015

UWT-ROSE-W15S3G7

3 Leden

4 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 822