Repareer je spullen Gemeenschap Winkel

Motorola syn1654A Headphone Speaker Replacement

Inleiding

This guide will be helpful for users who are in need of replacing the speakers on their headphones. You will need to know how to solder in order to complete this guide.

Wat je nodig hebt

  1. Motorola syn1654A Headphone Speaker Replacement, Headphone Speaker: stap 1, afbeelding 1 van 1

    • Make sure the headphones are off and unplugged from any devices.

    • Remove leather headphone cushion by pulling edge towards middle of headphone.

    • It should slip off the device.

    Bewerken

  2. Motorola syn1654A Headphone Speaker Replacement: stap 2, afbeelding 1 van 1

    • Carefully peel back foam pad to prevent tearing.

    • It is glued at both the top and bottom.

    Bewerken

  4. Motorola syn1654A Headphone Speaker Replacement: stap 3, afbeelding 1 van 1

    • Use the T6 torx screwdriver to remove the three screws holding the speaker in place.

    • To avoid stripping screws, be sure to use the right screw bit oriented perpendicular to the face of the screw.

    Bewerken

  5. Motorola syn1654A Headphone Speaker Replacement: stap 4, afbeelding 1 van 1

    • With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.

    • Solder wires onto corresponding pads of replacement speaker.

    • For soldering see the ifixit soldering guide: Hoe moet je (de-)solderen?

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 6 andere bijdragers

John Ware

Lid sinds: 02/24/14

325 Reputatie

2 handleidingen geschreven

Medailles: 8

+5 andere badges

Team

Michigan Tech, Team 5-1, Lauer Spring 2014 Lid van Michigan Tech, Team 5-1, Lauer Spring 2014

MTU-LAUER-S14S5G1

2 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 389