Ga door naar hoofdinhoud

Motorola i90c speaker replacement

Wat je nodig hebt

  1. Motorola i90c speaker replacement, Battery: stap 1, afbeelding 1 van 3 Motorola i90c speaker replacement, Battery: stap 1, afbeelding 2 van 3 Motorola i90c speaker replacement, Battery: stap 1, afbeelding 3 van 3
    • Slide the notch downward while pulling the back cover off to remove it.

  2. Motorola i90c speaker replacement: stap 2, afbeelding 1 van 3 Motorola i90c speaker replacement: stap 2, afbeelding 2 van 3 Motorola i90c speaker replacement: stap 2, afbeelding 3 van 3
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

  3. Motorola i90c speaker replacement, Antenna: stap 3, afbeelding 1 van 2 Motorola i90c speaker replacement, Antenna: stap 3, afbeelding 2 van 2
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

  4. Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: stap 4, afbeelding 1 van 3 Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: stap 4, afbeelding 2 van 3 Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: stap 4, afbeelding 3 van 3
    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

  5. Motorola i90c speaker replacement: stap 5, afbeelding 1 van 2 Motorola i90c speaker replacement: stap 5, afbeelding 2 van 2
    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

  6. Motorola i90c speaker replacement: stap 6, afbeelding 1 van 3 Motorola i90c speaker replacement: stap 6, afbeelding 2 van 3 Motorola i90c speaker replacement: stap 6, afbeelding 3 van 3
    • Carefully pry off the connection between the headphone jack and logic board.

  7. Motorola i90c speaker replacement, Speaker System: stap 7, afbeelding 1 van 3 Motorola i90c speaker replacement, Speaker System: stap 7, afbeelding 2 van 3 Motorola i90c speaker replacement, Speaker System: stap 7, afbeelding 3 van 3
    • Use the prying tools to wedge out the circular part of the speaker system.

    • Carefully pull out the wiring and circuit board attached to the speaker system using a prying tool or tweezers.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Jorge

Lid sinds: 04/14/10

4 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 29-61, Johann Spring 2010 Lid van Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 6

Altijd: 1,184