Ga door naar hoofdinhoud
  1. Insert the spudger between the silver body of the phone and the black "Verizon" display sticker. Work the spudger around the extremity of the sticker. Remove display sticker.
    • Insert the spudger between the silver body of the phone and the black "Verizon" display sticker.

    • Work the spudger around the extremity of the sticker.

    • Remove display sticker.

    • Be aware that if the display sticker comes back in contact with the phone it will adhere back to the phone.

  2. Using the T6 tool, remove the four 5mm screws on the face of the display (circled in red).Before replacing the screen, the four screws beneath the display must already be removed.
    • Using the T6 tool, remove the four 5mm screws on the face of the display (circled in red).Before replacing the screen, the four screws beneath the display must already be removed.

  3. Insert the tweezers between the front and back panels of the top half of the device. Make as large a gap as possible using the tweezers.
    • Insert the tweezers between the front and back panels of the top half of the device. Make as large a gap as possible using the tweezers.

  4. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  5. Using the Pry Bar, move around the entire edge of the the device until the two panels separate from each other. Grab the plastic casing and remove Grab the plastic casing and remove
    • Using the Pry Bar, move around the entire edge of the the device until the two panels separate from each other.

    • Grab the plastic casing and remove

  6. Use the pry bar to lift the metal cover from the screen housing. Use the pry bar to lift the metal cover from the screen housing. Use the pry bar to lift the metal cover from the screen housing.
    • Use the pry bar to lift the metal cover from the screen housing.

  7. Pry the chip connected by magnetic strip from the back of the screen. Remove display circuit board from the body of the phone.
    • Pry the chip connected by magnetic strip from the back of the screen.

    • Remove display circuit board from the body of the phone.

  8. Remove the screen from the front panel of the device. Remove the screen from the front panel of the device.
    • Remove the screen from the front panel of the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Justin Scott

Lid sinds: 26-03-14

501 Reputatie

5 handleidingen geschreven

Team

Clemson, Team 6-3, Benson Spring 2014 Lid van Clemson, Team 6-3, Benson Spring 2014

CLEM-BENSON-S14S6G3

3 Leden

18 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 110