Repareer je spullen Gemeenschap Winkel

Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement

Inleiding

Use this repair guide to replace a flip-stop bumper pad in a Motorola RAZR2 v9m.

Wat je nodig hebt

  1. Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement, Flip-stop Bumper Pad: stap 1, afbeelding 1 van 3 Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement, Flip-stop Bumper Pad: stap 1, afbeelding 2 van 3 Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement, Flip-stop Bumper Pad: stap 1, afbeelding 3 van 3

    • Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone.

    • The bumper is held in place with adhesive. If you plan on reusing the bumper, then use clean tools to keep the surface sticky.

    • Grab the bowed portion of bumper. Gently lift and peel the bumper away from the phone.

    • Remember that the bumper will be sticky. Place it somewhere clean if you will be reusing it.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 401