Inleiding

This guide outlines the steps to disassemble the Q Global to access the internal speakers. It can be used to replace or repair a damaged speaker.

Onderdelen

Geen onderdelen nodig.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

Voeg opmerking toe

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

Voeg opmerking toe

  • Press inwardly on the upper casing until it pops out of the phone.

Voeg opmerking toe

  • Slide the upper case rightward and lift up.

  • Lift the camera sticker so that it does not get damaged.

Voeg opmerking toe

  • Remove the six labeled screws with a T5 torx screw driver.

Voeg opmerking toe

  • Once the screws are removed, use the plastic opening tool to remove the black casing.

Voeg opmerking toe

  • Remove the speakers by using the plastic remover tool.

Voeg opmerking toe

  • Insert the new speakers by gently pressing them down into place.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Carlos De La Parra

Lid sinds: 05-10-12

14 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 6-31, Regan Fall 2012 Lid van Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 540