Inleiding

This guide will focus on disassembling the necessary components for the phone in order to get to the camera hardware and remove it from the motherboard.

Onderdelen

Geen onderdelen nodig.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

Voeg opmerking toe

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown. When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

Voeg opmerking toe

Press inward on the upper casing.
  • Press inward on the upper casing.

Voeg opmerking toe

Slide the upper case to the right and lift up.
  • Slide the upper case to the right and lift up.

  • Lift the camera sticker so that it doesn't get damaged.

Voeg opmerking toe

Remove the six labeled screws with a T5 Torx Screwdriver. Remove the six labeled screws with a T5 Torx Screwdriver.
  • Remove the six labeled screws with a T5 Torx Screwdriver.

Voeg opmerking toe

Once the screws are removed, use the plastic opening tool to remove the black casing.
  • Once the screws are removed, use the plastic opening tool to remove the black casing.

Voeg opmerking toe

Remove both screws on the mounted surface with a T5 screwdriver. Remove both screws on the mounted surface with a T5 screwdriver.
  • Remove both screws on the mounted surface with a T5 screwdriver.

Voeg opmerking toe

Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool. Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.
  • Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.

Voeg opmerking toe

Use the plastic opening tool to lift the camera from the phone.
  • Use the plastic opening tool to lift the camera from the phone.

Voeg opmerking toe

The new camera can now be attached to the motherboard.
  • The new camera can now be attached to the motherboard.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Jorge Vanegas Moran

Lid sinds: 03-10-12

8 reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 6-31, Regan Fall 2012 Lid van Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 550