Repareer je spullen Gemeenschap Winkel

Motorola One Action Battery Replacement

Wat je nodig hebt

  1. Motorola One Action Battery Replacement, Pry open back cover: stap 1, afbeelding 1 van 1

    • Use the IFixit prying and opening tool to not damage the phone like I did.

    • The red line indicates the opening, follow it all the way around the phone.

    • Use a hair dryer or heat gun to soften the glue if necessary.

    Bewerken

  2. Motorola One Action Battery Replacement, Disconnect fingerprint sensor: stap 2, afbeelding 1 van 1

    • Peel the small yellow tab away with a small flathead screwdriver.

    • Slide the metal shield down to unlock and remove it.

    Bewerken

  4. Motorola One Action Battery Replacement, Undo the screws: stap 3, afbeelding 1 van 1

    • Undo all the screws on the top cover.

    Bewerken

  5. Motorola One Action Battery Replacement, Remove top cover: stap 4, afbeelding 1 van 1

    • Use a small flathead to loosen the cover.

    • Around the red markers are little clips that keep it in place.

    Bewerken

  6. Motorola One Action Battery Replacement, Replace battery: stap 5, afbeelding 1 van 1

    • Inside the red marker, disconnect the battery cable and carefully pull the battery out.

    • Use a non-metal prying tool to pull the corners up and apply heat to soften the glue in the process.

    • Be careful and make sure that the battery doesn't bend too far or breaks.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Ferre Vekemans

Lid sinds: 08/14/20

328 Reputatie

1 Handleiding geschreven

Medailles: 7

+4 andere badges

Één opmerking

Man, is that battery sticky.... Anyway good writeup, works like a charm

dan - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 11

Afgelopen 7 dagen: 56

Afgelopen 30 dagen: 226

Altijd: 6,156