Remove the back cover by sliding the clip and lifting up the bottom of the cover.
  • Remove the back cover by sliding the clip and lifting up the bottom of the cover.

Voeg opmerking toe

Remove screws 1 through 4.
  • Remove screws 1 through 4.

Voeg opmerking toe

  • Once all four screws are removed, you should be able to pop off the back half of the phone.

Voeg opmerking toe

  • Flip the logic board up to reveal the back of the keypad.

Voeg opmerking toe

  • Peal the back of the keypad off of the phone. (Highlighted area are the parts where you can begin to peal from). That white pad is what is being replaced.

Voeg opmerking toe

  • Take your new key pad and line the holes up with the pegs sticking out of the phone. (Pegs are highlighted).

  • Secure the rest of the key pad.

Voeg opmerking toe

  • Put the logic board back into place and reattach cable number 1.

Voeg opmerking toe

  • Snap the front and back of the phone back together and reinsert screws 1 through 4.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Danielle Matthews

Lid sinds: 17-10-14

13 Reputatie

3 handleidingen geschreven

Team

UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014 Lid van UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014

UMASSD-VIJAYBHASKAR-F14S6G7

3 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 61