Inleiding

Use this guide to eject or replace your Motorola Moto X SIM card.

Onderdelen

Geen onderdelen nodig.

  1. Insert the SIM card eject tool into the hole in the side of the SIM card tray and push to eject the tray.
    • Insert the SIM card eject tool into the hole in the side of the SIM card tray and push to eject the tray.

    • Remove the SIM card tray.

    • If the SIM card does not fall free from the tray on its own, simply remove it with your fingers.

    Voeg opmerking toe

  2. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
Conclusie

To reassemble your device, follow these instructions in reverse order.

9 andere personen hebben deze handleiding voltooid.

Sam Lionheart

Lid sinds: 18-10-12

341.837 Reputatie

535 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

114 Leden

7.042 handleidingen geschreven

For my Moto X that I designed from Motorola's website, I had to slightly angle my SIM eject tool to aid in pulling the tray out as it did not eject easily.

Casey Deem - Antwoord

Who can fix my screàn on uscellular moto x2nd generation

Mike Fuller - Antwoord

Screàn needs replaced. Come on and màke s sounds...but no picture

Mike Fuller - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 6

Afgelopen 30 Dagen: 28

Altijd: 10,878