Annuleer

Motorola Moto X Motherboard Assembly Replacement

Geschreven door: Sam Lionheart (en 3 andere bijdragers)

Reacties: 12
Favorieten: 0

Motorola Moto X Motherboard Assembly Replacement

Moeilijkheid

Gemiddeld

Stappen

10

Tijd vereist

Stel een tijd voor??

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

Stap 1 Motherboard Assembly

Remove the five 3 mm T3 Torx screws from the headphone jack/speaker assembly.

Remove the five 3 mm T3 Torx screws from the headphone jack/speaker assembly.

Stap 2

Insert a spudger under the panhandle of the headphone jack/speaker assembly and pry it up from its recess.

Remove the headphone jack/speaker assembly.

Remove the headphone jack/speaker assembly.

Insert a spudger under the panhandle of the headphone jack/speaker assembly and pry it up from its recess.
Remove the headphone jack/speaker assembly.

Stap 3

Push the tip of a spudger under the microphone assembly clip to free it from the earpiece speaker.

If the assembly clip seems to be missing, check the speaker assembly that was removed from the previous step.

Push the tip of a spudger under the microphone assembly clip to free it from the earpiece speaker.
If the assembly clip seems to be missing, check the speaker assembly that was removed from the previous step.

Stap 4

Use the flat end of a spudger to free the microphone assembly cable connector.

Use tweezers to remove the microphone assembly.

Use the flat end of a spudger to free the microphone assembly cable connector.
Use tweezers to remove the microphone assembly.

Stap 5

Disconnect the front-facing camera cable connector.

Remove the front-facing camera from its recess with a pair of tweezers.

Disconnect the front-facing camera cable connector.
Remove the front-facing camera from its recess with a pair of tweezers.

Stap 6

Remove the final two 3 mm T3 Torx screws from the SIM slot bracket.

Remove the final two 3 mm T3 Torx screws from the SIM slot bracket.

Stap 7

Remove the SIM slot bracket from the motherboard.

Remove the SIM slot bracket from the motherboard.

Stap 8

Insert the flat end of a spudger under the motherboard above the button assembly cable, and pry it out of the phone.

Be careful not to snag any cables.

Insert the flat end of a spudger under the motherboard above the button assembly cable, and pry it out of the phone.
Be careful not to snag any cables.
The buttons may pop out of their recesses; take care not to lose them.

Stap 9

Gently lift the motherboard out of the phone, rotating it from the SIM slot edge of the phone.

Do not attempt to separate the motherboard entirely; it is still connected to the display by the display cable.

Gently lift the motherboard out of the phone, rotating it from the SIM slot edge of the phone.
Do not attempt to separate the motherboard entirely; it is still connected to the display by the display cable.

Stap 10

Lay the motherboard down to allow access to the display cable connector.

Use the flat end of a spudger to flip the retaining tab on the display cable ZIF connector.

Carefully pull the display cable out of its connector as you remove the motherboard from the display assembly.

Lay the motherboard down to allow access to the display cable connector.
Use the flat end of a spudger to flip the retaining tab on the display cable ZIF connector.
Carefully pull the display cable out of its connector as you remove the motherboard from the display assembly.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Sam Lionheart

Lid sinds: 18-10-12

366.967 Reputatie

537 handleidingen geschreven

+45 andere badges

Team

iFixit Lid van iFixit

Community

104 Leden

8.342 handleidingen geschreven

0 Opmerkingen

Een opmerking toevoegen

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 54