Ga door naar hoofdinhoud

Motorola Moto X 2nd Generation Power and Volume flex cable Replacement

Wat je nodig hebt

  1. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: stap 1, afbeelding 1 van 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: stap 1, afbeelding 2 van 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: stap 1, afbeelding 3 van 3
    • Remove SIM card tray.

  2. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 2, afbeelding 1 van 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 2, afbeelding 2 van 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 2, afbeelding 3 van 3
    • Remove back cover.

  3. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 3, afbeelding 1 van 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 3, afbeelding 2 van 2
    • Remove those two rubber cover.

  4. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 4, afbeelding 1 van 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 4, afbeelding 2 van 2
    • Release power connecting flex connector and battery connector.

  5. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 5, afbeelding 1 van 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 5, afbeelding 2 van 2
    • Twist off all 18 black torx screws and remove the middle housing from front assembly.

  6. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 6, afbeelding 1 van 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 6, afbeelding 2 van 2
    • Release power flex connector from connecting flex.

  7. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 7, afbeelding 1 van 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 7, afbeelding 2 van 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 7, afbeelding 3 van 3
    • Remove securing bracket and side buttons.

  8. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: stap 8, afbeelding 1 van 1
    • Pry up and remove the power flex.

Conclusie

To reassemble your device, follow these instructions in reverse order.

10 andere personen hebben deze handleiding voltooid.

Sophia

Lid sinds: 03/25/14

43.810 Reputatie

62 handleidingen geschreven

3 opmerkingen

Followed your instructions. Volume works, power button still no go.

It clicks fine, but nothing happens..

Carlo Petermann - Antwoord

I have the same issue. Any ideas? Resolutions?

sagar bhale -

The screwdriver is T4 on my european moto X 2014, not T3!!

Clément Masci - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 6

Altijd: 5,090