Ga door naar hoofdinhoud

Motorola Moto G7 Speaker Replacement

Wat je nodig hebt

  1. Motorola Moto G7 Speaker Replacement, Screen: stap 1, afbeelding 1 van 3 Motorola Moto G7 Speaker Replacement, Screen: stap 1, afbeelding 2 van 3 Motorola Moto G7 Speaker Replacement, Screen: stap 1, afbeelding 3 van 3
    • Use the iFixit opening tools to gently wedge the front screen from the rest of the device.

    • Try to focus on the corners to make it easier to insert and use the iFixit opening picks.

    • It is also recommended to use the iOpener or a heat gun to weaken the adhesive that holds the edges of the screen down.

    • The screen is glass, so when using force to lift the screen, be cautious of cracked glass and stray shards of glass coming off.

    • You have to be extra careful to dig deep enough, so you lift the entire screen unit!

  2. Motorola Moto G7 Speaker Replacement: stap 2, afbeelding 1 van 1
    • Excessive glass and adhesive around the edges should be removed with the spudger.

    • The glass is black and may blend in with edges of the device. Be cautious using bare hands when moving the device.

  3. Motorola Moto G7 Speaker Replacement: stap 3, afbeelding 1 van 2 Motorola Moto G7 Speaker Replacement: stap 3, afbeelding 2 van 2
    • Remove three 2.7mm T3 Torx screws from the metal piece to the right of the battery.

  4. Motorola Moto G7 Speaker Replacement: stap 4, afbeelding 1 van 3 Motorola Moto G7 Speaker Replacement: stap 4, afbeelding 2 van 3 Motorola Moto G7 Speaker Replacement: stap 4, afbeelding 3 van 3
    • Use a spudger to gently take off the metal piece that was held down by the screws.

    • A second metal piece is held under the first. This can also be popped off by using the spudger and nudging it under the metal piece connected to the band.

  5. Motorola Moto G7 Speaker Replacement, Speaker: stap 5, afbeelding 1 van 3 Motorola Moto G7 Speaker Replacement, Speaker: stap 5, afbeelding 2 van 3 Motorola Moto G7 Speaker Replacement, Speaker: stap 5, afbeelding 3 van 3
    • Remove three 3.7mm T3 Torx screws from the bottom of the phone.

    • Use the spudger to gently lift the speaker out of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Peter Nelson

Lid sinds: 01/23/20

742 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team S19-G6, White Winter 2020 Lid van Cal Poly, Team S19-G6, White Winter 2020

CPSU-WHITE-W20S19G6

4 Leden

20 handleidingen geschreven

Één opmerking

Could you perhaps offer any advice on how to source one of these bottom-ported speakers?

Kevin Lettelleir - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 31

Altijd: 4,271