Repareer je spullen Gemeenschap Winkel

Motorola Moto G7 Play Speaker Replacement

Inleiding

This guide will show each detailed step to removing and replacing the speaker inside Motorola G7 Play, model number XT1952-3 or XT1952-2. The speaker is used for phone calls and playing sound on the phone. If the phone no longer plays audio correctly or doesn’t have any audio the speaker will need to be replace.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

Wat je nodig hebt

  1. Motorola Moto G7 Play Speaker Replacement, Back Cover: stap 1, afbeelding 1 van 2 Motorola Moto G7 Play Speaker Replacement, Back Cover: stap 1, afbeelding 2 van 2

    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

    Bewerken

  2. Motorola Moto G7 Play Speaker Replacement: stap 2, afbeelding 1 van 1

    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

    Bewerken

  3. Motorola Moto G7 Play Speaker Replacement: stap 3, afbeelding 1 van 2 Motorola Moto G7 Play Speaker Replacement: stap 3, afbeelding 2 van 2

    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

    Bewerken

  5. Motorola Moto G7 Play Speaker Replacement, Motherboard: stap 4, afbeelding 1 van 1

    • Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

    Bewerken

  6. Motorola Moto G7 Play Speaker Replacement: stap 5, afbeelding 1 van 1
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Lift motherboard cover off by the bottom.

    • Use reverse tweezers or a similar tool if needed.

    Bewerken

  7. Motorola Moto G7 Play Speaker Replacement: stap 6, afbeelding 1 van 2 Motorola Moto G7 Play Speaker Replacement: stap 6, afbeelding 2 van 2

    • Once the motherboard cover is removed, disconnect the four ribbon cables and the two wires attached to the motherboard.

    Bewerken

  8. Motorola Moto G7 Play Speaker Replacement: stap 7, afbeelding 1 van 2 Motorola Moto G7 Play Speaker Replacement: stap 7, afbeelding 2 van 2

    • Using the Phillips #00 screwdriver, remove the single 0.4 mm black screw in the center of the motherboard.

    • Remove the motherboard from the device.

    Bewerken

  9. Motorola Moto G7 Play Speaker Replacement, Speaker: stap 8, afbeelding 1 van 2 Motorola Moto G7 Play Speaker Replacement, Speaker: stap 8, afbeelding 2 van 2

    • Use the spudger to remove the speaker from the top of the phone.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

2 opmerkingen

Nice guide to repair any mobile phone

Fisseha Desta - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 24

Altijd: 1,186