Repareer je spullen Gemeenschap Winkel

Motorola Moto G7 Play Motherboard Replacement

Inleiding

This motherboard replacement guide should be attempted if other parts of the device were replaced, but the problem persisted. The steps should be followed for the Motorola G7 Play, models XT1952-3 and XT1952-2. The motherboard powers the whole device and makes it function, so it’s a very important part that should be replaced if it is damaged.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

Wat je nodig hebt

  1. Motorola Moto G7 Play Motherboard Replacement, Back Cover: stap 1, afbeelding 1 van 2 Motorola Moto G7 Play Motherboard Replacement, Back Cover: stap 1, afbeelding 2 van 2

    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

    Bewerken

  2. Motorola Moto G7 Play Motherboard Replacement: stap 2, afbeelding 1 van 1

    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

    Bewerken

  3. Motorola Moto G7 Play Motherboard Replacement: stap 3, afbeelding 1 van 2 Motorola Moto G7 Play Motherboard Replacement: stap 3, afbeelding 2 van 2

    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

    Bewerken

  5. Motorola Moto G7 Play Motherboard Replacement, Motherboard: stap 4, afbeelding 1 van 1

    • Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

    Bewerken

  6. Motorola Moto G7 Play Motherboard Replacement: stap 5, afbeelding 1 van 1

    • Lift motherboard cover off by the bottom.

    • Use reverse tweezers or a similar tool if needed.

    Bewerken

  7. Motorola Moto G7 Play Motherboard Replacement: stap 6, afbeelding 1 van 2 Motorola Moto G7 Play Motherboard Replacement: stap 6, afbeelding 2 van 2

    • Once the motherboard cover is removed, disconnect the four ribbon cables and the two wires attached to the motherboard.

    Bewerken

  8. Motorola Moto G7 Play Motherboard Replacement: stap 7, afbeelding 1 van 2 Motorola Moto G7 Play Motherboard Replacement: stap 7, afbeelding 2 van 2

    • Using the Phillips #00 screwdriver, remove the single 0.4 mm black screw in the center of the motherboard.

    • Remove the motherboard from the device.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 5 andere bijdragers

Monserath Casillas

Lid sinds: 02/10/20

1.146 Reputatie

5 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

Cal Poly, Team S7-G4, Regan Winter 2020 Lid van Cal Poly, Team S7-G4, Regan Winter 2020

CPSU-REGAN-W20S7G4

5 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 23

Altijd: 2,166