Ga door naar hoofdinhoud

Inleiding

Changing the wrist strap may be easier if the rear cover is taken off first, but removing the rear cover is not required and risks damage to the rear of your device.

Onderdelen

Geen onderdelen opgegeven.

  1. Locate the spring-loaded pin that attaches the wrist strap to the watch.
    • Locate the spring-loaded pin that attaches the wrist strap to the watch.

    • There is a tiny groove on the end of the pin. This is where you will place the tweezers.

  2. Take care not to lose the spring-loaded pin when removing the strap.
    • Take care not to lose the spring-loaded pin when removing the strap.

    • Use the tweezers to compress the spring-loaded pin so the strap can be removed.

  3. Pull the wristband away from the watch face. Pull the wristband away from the watch face.
    • Pull the wristband away from the watch face.

Conclusie

To reassemble your device, follow these instructions in reverse order.

11 andere personen hebben deze handleiding voltooid.

Steven Tan

Lid sinds: 30-01-15

293 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 17-32, Amido Winter 2015 Lid van Cal Poly, Team 17-32, Amido Winter 2015

CPSU-AMIDO-W15S17G32

4 Leden

18 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 11

Altijd: 3,509