Inleiding
This panel should be removed to get to all of the watch's insides. It is extremely fragile, so use caution when removing it.
Wat je nodig hebt
-
-
Set the watch face down on a flat surface.
-
Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.
-
-
-
Follow the instructions here to remove the back cover without force by using some needles in the right places:
-
Then continue with step 5. Or don't use needles and just continue with the next steps.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
9 andere personen hebben deze handleiding voltooid.
Één opmerking
How does this *rear cover replacement* count as "no parts required"?