Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Motorola Droid Turbo Rear Case Replacement

Wat je nodig hebt

  1. Motorola Droid Turbo Rear Case Replacement, Rear Case: stap 1, afbeelding 1 van 1
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Motorola Droid Turbo Rear Case Replacement: stap 2, afbeelding 1 van 2 Motorola Droid Turbo Rear Case Replacement: stap 2, afbeelding 2 van 2
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Lid sinds: 09/30/13

89.849 Reputatie

89 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 1,573