Ga door naar hoofdinhoud

Motorola Defy Earpiece Speaker Replacement

Wat je nodig hebt

  1. Motorola Defy Earpiece Speaker Replacement, Rear Case: stap 1, afbeelding 1 van 1
    • Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.

  2. Motorola Defy Earpiece Speaker Replacement: stap 2, afbeelding 1 van 2 Motorola Defy Earpiece Speaker Replacement: stap 2, afbeelding 2 van 2
    • Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.

  3. Motorola Defy Earpiece Speaker Replacement, Battery: stap 3, afbeelding 1 van 1
    • Use a plastic opening tool to pry the battery out of the phone.

  4. Motorola Defy Earpiece Speaker Replacement, Midframe: stap 4, afbeelding 1 van 1
    • Unscrew the two silver screws located at the top of the back of the phone.

  5. Motorola Defy Earpiece Speaker Replacement: stap 5, afbeelding 1 van 1
    • Use a plastic opening tool to gently pry the midframe from the rest of the phone.

  6. Motorola Defy Earpiece Speaker Replacement, Motherboard: stap 6, afbeelding 1 van 2 Motorola Defy Earpiece Speaker Replacement, Motherboard: stap 6, afbeelding 2 van 2
    • Use metal spudger to pry off the middle yellow flap carefully.

  7. Motorola Defy Earpiece Speaker Replacement: stap 7, afbeelding 1 van 3 Motorola Defy Earpiece Speaker Replacement: stap 7, afbeelding 2 van 3 Motorola Defy Earpiece Speaker Replacement: stap 7, afbeelding 3 van 3
    • Use tweezers again to pry off the second yellow flap carefully.

  8. Motorola Defy Earpiece Speaker Replacement: stap 8, afbeelding 1 van 1
    • The motherboard is the whole green board. Pry it off carefully with tweezers from the sides and place it aside.

  9. Motorola Defy Earpiece Speaker Replacement, Remove the earpiece speaker: stap 9, afbeelding 1 van 2 Motorola Defy Earpiece Speaker Replacement, Remove the earpiece speaker: stap 9, afbeelding 2 van 2
    • Once the motherboard is removed, use either the metal tweezers or the metal spudger to remove the speaker by prying it as shown.

    • The speaker is glued to its position, thus you will have to glue the new one back on.

    • The speaker must be pried off carefully. It is very delicate.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Andres

Lid sinds: 10/08/14

101 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 14-2, Leahy Fall 2014 Lid van USF Tampa, Team 14-2, Leahy Fall 2014

USFT-LEAHY-F14S14G2

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 619