Ga door naar hoofdinhoud

Motor and Cord Replacement

Wat je nodig hebt

  1. Motor and Cord Replacement, The Motor and Cord: stap 1, afbeelding 1 van 1
    • Remove the highlighted screws shown with a Phillips #2 Screwdriver.

  2. Motor and Cord Replacement: stap 2, afbeelding 1 van 1
    • Remove the motor from the motor mounting plate. Pull the motor and cord to the side.

  3. Motor and Cord Replacement: stap 3, afbeelding 1 van 1
    • Use pliers to grip the crimp.

  4. Motor and Cord Replacement: stap 4, afbeelding 1 van 1
    • Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.

  5. Motor and Cord Replacement: stap 5, afbeelding 1 van 1
    • Remove the crimps from the wires by pulling them off.

  6. Motor and Cord Replacement: stap 6, afbeelding 1 van 1
    • Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.

  7. Motor and Cord Replacement: stap 7, afbeelding 1 van 1
    • Separate the cord and motor.

    • Now, depending on whether the cord or the motor was broken, head to the device page to order a new one.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Kamal Taha

Lid sinds: 08/27/15

679 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 1-3, Sullivan Fall 2015 Lid van USF Tampa, Team 1-3, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G3

3 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 16

Altijd: 3,107