Ga door naar hoofdinhoud
  1. Unplug and power off the speaker. Lay the device on its back and unpeel the silicone base. Unscrew the four 5mm Torx Security #10 at base.
    • Unplug and power off the speaker.

    • Lay the device on its back and unpeel the silicone base.

    • Unscrew the four 5mm Torx Security #10 at base.

  2. Return the device rightside up and unpeel the black display cover over the sensor board. Unscrew the two 3mm Torx Security #6 screws on the edge of the device. Unscrew the two 5mm Torx Security #10 in the middle of the device.
    • Return the device rightside up and unpeel the black display cover over the sensor board.

    • Unscrew the two 3mm Torx Security #6 screws on the edge of the device.

    • Unscrew the two 5mm Torx Security #10 in the middle of the device.

    • Do not worry, the display board will re-stick when reassembling.

  3. Remove the metal screen. Remove the metal screen.
    • Remove the metal screen.

  4. Unscrew the two 4mm Torx Security #10 screws on the top edge.
    • Unscrew the two 4mm Torx Security #10 screws on the top edge.

    • Unscrew the six 10mm Torx Security #10 screws around the perimeter.

  5. Remove the four 10mm Torx Security #10 screws around each individual speakers. Loosen the two Torx Security #10 screws under the speaker using pliers or a long screwdriver.
    • Remove the four 10mm Torx Security #10 screws around each individual speakers.

    • Loosen the two Torx Security #10 screws under the speaker using pliers or a long screwdriver.

    • Screws are hidden and are difficult to get to. Also, these screws remain in place due to the magnetic speakers inside.

  6. Lift the speaker assembly and remove the stuffing. When returning the speaker assembly, make sure the stuffing is tucked in. When returning the speaker assembly, make sure the stuffing is tucked in.
    • Lift the speaker assembly and remove the stuffing.

    • When returning the speaker assembly, make sure the stuffing is tucked in.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sarah Garcia

Lid sinds: 12-09-16

207 Reputatie

1 Handleiding geschreven

Team

CSU Fullerton, Team 2-6, Bruce Fall 2016 Lid van CSU Fullerton, Team 2-6, Bruce Fall 2016

CSUF-BRUCE-F16S2G6

4 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 55