Ga door naar hoofdinhoud

Modal MD-SPBT01 LED Light Wiring Replacement

Wat je nodig hebt

  1. Modal MD-SPBT01 LED Light Wiring Replacement, LED Light Wiring: stap 1, afbeelding 1 van 2 Modal MD-SPBT01 LED Light Wiring Replacement, LED Light Wiring: stap 1, afbeelding 2 van 2
    • Use your plastic opening tool to pry the metal speaker cover off.

  2. Modal MD-SPBT01 LED Light Wiring Replacement: stap 2, afbeelding 1 van 1
    • You can now use the Phillips #00 screwdriver to remove the four screws.

  3. Modal MD-SPBT01 LED Light Wiring Replacement: stap 3, afbeelding 1 van 1
    • With the screws removed, you can now remove the top piece of the speaker to gain access to the interior.

  4. Modal MD-SPBT01 LED Light Wiring Replacement: stap 4, afbeelding 1 van 1
    • Locate the LED wire connection and remove it from the mother board.

    • To make replacing the LED wiring easier, remove the speaker wire to fully disconnect the speaker from the mother board.

  5. Modal MD-SPBT01 LED Light Wiring Replacement: stap 5, afbeelding 1 van 1
    • Now you can remove the wiring from the speaker side of the device.

    • It might take a bit of work to remove the wires because they are glued down on this side.

  6. Modal MD-SPBT01 LED Light Wiring Replacement: stap 6, afbeelding 1 van 1
    • Now with the LED wiring removed, a new wire can be installed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nathan Hall

Lid sinds: 10/13/15

258 Reputatie

2 handleidingen geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 621